Your browser's Javascript functionality is turned off. Please turn it on so that you can experience the full capabilities of this site.

Care & Maintenance

Chicco Product Care

Chicco wants to make your parenting experience as convenient as possible. That's why we design quality products with innovative features that save you time and energy. The best way to ensure that the products you love have a long and fully-functional life is regular care, as outlined in your product manual. Below you can find the care and maintenance instructions for each of your Chicco products.

Car Seats

Infant

KeyFit

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT USE BLEACH.

Removing the Seat Pad:

Remove Harness Straps from Harness Slots as described in "Changing Harness Height." Unhook elastic band attached around handle pivots, and disconnect chest clip and buckle. Carefully pull seat pad from under Adjuster Cover. ADJUSTER COVER MUST REMAIN IN PLACE. Guide harness assembly through slots in bottom of seat pad, while removing from Carrier.

NEVER remove Harness or harness components from Carrier. If harness is extremely soiled or damaged, Call Chicco to order a replacement.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the plastics.

Cleaning Harness and LATCH Straps:

Sponge clean using warm water and mild soap. Air dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the straps.

Cleaning Buckle and LATCH Hardware:

Sponge clean, or rinse in cup of warm water. DO NOT USE ANY SOAPS OR LUBRICANTS on Buckle or LATCH Hardware. It may cause them to malfunction.

KeyFit 30

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT USE BLEACH.

Removing the Seat Pad:

Remove Harness Straps from Harness Slots as described in "Changing Harness Height" in the product manual. Unhook elastic band attached around handle pivots, and disconnect chest clip and buckle. Carefully pull seat pad from under Adjuster Cover. ADJUSTER COVER MUST REMAIN IN PLACE. Guide harness assembly through slots in bottom of seat pad, while removing from Carrier.

NEVER remove Harness or harness components from Carrier. If harness is extremely soiled or damaged, Call Chicco to order a replacement.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the plastics.

Cleaning Harness and LATCH Straps:

Sponge clean using warm water and mild soap. Air dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the straps.

Cleaning Buckle and LATCH Hardware:

Sponge clean, or rinse in cup of warm water. DO NOT USE ANY SOAPS OR LUBRICANTS on Buckle or LATCH Hardware. It may cause them to malfunction.

KeyFit 30 Zip

Cleaning:

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT BLEACH.

To remove the seat cover of the car seat, please refer to the product manual.

NEVER remove Harness or harness components from Carrier. If harness is extremely soiled or damaged, Call Chicco to order a replacement.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the plastics.

Cleaning Harness and LATCH Straps:

Sponge clean using warm water and mild soap. Air dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the straps.

Cleaning Buckle and LATCH Hardware:

Sponge clean, or rinse in cup of warm water. DO NOT USE ANY SOAPS OR LUBRICANTS on Buckle or LATCH Hardware. It may cause them to malfunction.

KeyFit 30 Zip Air

Cleaning:

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT BLEACH.

To remove the seat cover of the car seat, please refer to the product manual.

NEVER remove Harness or harness components from Carrier. If harness is extremely soiled or damaged, Call Chicco to order a replacement.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the plastics.

Cleaning Harness and LATCH Straps:

Sponge clean using warm water and mild soap. Air dry. DO NOT USE BLEACH, solvents, or household cleaners, as they may weaken the straps.

Cleaning Buckle and LATCH Hardware:

Sponge clean, or rinse in cup of warm water. DO NOT USE ANY SOAPS OR LUBRICANTS on Buckle or LATCH Hardware. It may cause them to malfunction.

Fit2/Fit2 LE

Cleaning:

Fabrics may be spot-cleaned, hand or machine washed: Hand wash using mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT USE BLEACH, solvents or household cleaners as they may weaken plastics and straps.

To remove the seat cover of the car seat, please refer to the product manual.

NEVER remove Harness or harness components from Carrier. If harness is extremely soiled or damaged, Call Chicco to order a replacement.

Cleaning Shoulder Pads:

Hand wash using mild soap and water. Hang to dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Harness and LATCH Straps:

Sponge clean using warm water and mild soap. Air dry. Do NOT machine wash.LATCH Straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Cleaning Buckle and LATCH Hardware:

Sponge clean, using warm water and mild soap.

Convertible

NextFit/NextFit iX

Fabrics may be spot-cleaned: Hand wash using mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. See page 96 of the product manual for removal instructions.

DO NOT USE BLEACH, solvents or household cleaners as they may weaken plastics and straps.

DO NOT USE SOAPS OR LUBRICANTS on Buckle or LATCH hardware. It may cause them to malfunction.

To remove the seat cover of the car seat, please refer to the product manual.

Cleaning Shoulder Pads:

Hand wash using mild soap and water. Hang to dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Harness:

Sponge clean using warm water and mild soap. Air dry. Do NOT machine wash.

Cleaning LATCH Straps:

LATCH Straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Cleaning Buckle and LATCH Hardware:

Sponge clean, using warm water and mild soap. If debris in buckle, remove and rinse in warm cup of water. Air dry. See page 98 of product manual for removal instructions.

Do NOT remove LATCH or Adjuster straps.

NextFit CX

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT BLEACH.

DO NOT USE BLEACH, solvents or household cleaners as they may weaken plastics and straps.

DO NOT USE SOAPS OR LUBRICANTS on Buckle or LATCH hardware. It may cause them to malfunction.

To remove the seat cover of the car seat, please refer to the product manual.

Cleaning Shoulder Pads:

Hand wash using mild soap and water. Hang to dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Harness:

Sponge clean using warm water and mild soap. Air dry. Do NOT machine wash.

Cleaning LATCH Straps:

LATCH Straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Cleaning Buckle and LATCH Hardware:

Sponge clean, using warm water and mild soap. If debris in buckle, remove and rinse in warm cup of water. Air dry. See page 98 of product manual for removal instructions.

Do NOT remove LATCH or Adjuster straps.

NextFit Zip/NextFit iX Zip

Fabrics may be spot-cleaned: Hand wash using mild soap and water or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. See page 96 of the product manual for removal instructions.

To remove the seat cover of the car seat, please refer to the product manual.

Cleaning Shoulder Pads:

Hand wash using soap and water. Hang to dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Harness:

Sponge clean using warm water and mild soap. Air dry. Do NOT machine wash.

Cleaning LATCH Straps:

LATCH Straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Cleaning Buckle and LATCH Hardware:

Sponge clean, using warm water and mild soap. If debris is buckle, remove and rinse in warm cup of water. Air dry. See page 98 for removal instructions.

Do NOT remove LATCH or Adjuster straps.

NextFit Zip Air/NextFit iX Zip Air/NextFit iX Zip LUXE

To remove the seat cover of the car seat, please refer to the product manual.

Cleaning Shoulder Pads:

Hand wash using soap and water. Hang to dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Harness:

Sponge clean using warm water and mild soap. Air dry. Do NOT machine wash.

Cleaning LATCH Straps:

LATCH Straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Cleaning Buckle and LATCH Hardware:

Sponge clean, using warm water and mild soap. If debris is buckle, remove and rinse in warm cup of water. Air dry. See page 98 for removal instructions.

Do NOT remove LATCH or Adjuster straps.

Boosters

KidFit

Fabrics may be spot-cleaned: Hand wash using mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. See page 70 of the product manual for removal instructions.

To remove the seat cover of the car seat, please refer to the product manual.

Foam Insert:

Hand rinse and air dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Lower Anchor Connectors Hardware and Straps:

Lower Anchor Connectors hardware and straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Storing the Booster:

When it is not installed in the car, it is recommended to store the Booster in a dry place, away from sources of heat, dust, humidity and direct sunlight.

KidFit Zip

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT BLEACH.

To remove the seat cover of the car seat, please refer to the product manual.

Foam Insert:

Hand rinse and air dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Lower Anchor Connectors Hardware and Straps:

Lower Anchor Connectors hardware and straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Storing the Booster:

When it is not installed in the car, it is recommended to store the Booster in a dry place, away from sources of heat, dust, humidity and direct sunlight.

KidFit Zip Air/KidFit Zip LUXE

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT BLEACH.

To remove the seat cover of the car seat, please refer to the product manual.

Foam Insert:

Hand rinse and air dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Cleaning Lower Anchor Connectors Hardware and Straps:

Lower Anchor Connectors hardware and straps cannot be replaced. Sponge clean using warm water and mild soap. Air dry.

Storing the Booster:

When it is not installed in the car, it is recommended to store the Booster in a dry place, away from sources of heat, dust, humidity and direct sunlight.

GoFit

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry.

To remove the seat cover of the car seat, please refer to page 42 in product manual.

Foam Insert:

Hand rinse and air dry.

Cleaning Plastics:

Sponge clean using warm water and mild soap. Towel dry.

Storing the Booster:

When it is not installed in the car, it is recommended to store the Booster in a dry place, away from sources of heat, dust, humidity and direct sunlight.

Strollers

Travel Systems

Bravo Trio

Bravo Cleaning Instructions:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Bravo Maintenance Instructions:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. Periodically check the condition of the wheels, and keep them clean of dust and sand. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place. Prolonged exposure to direct sunlight may cause the fabric to fade.

KeyFit 30 Cleaning Instructions:

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT USE BLEACH.

KeyFit 30 Maintenance:

To clean Plastics, Harness, Buckle, LATCH Straps, and LATCH Hardware:

Sponge clean using warm water and mild soap. Towel dry.

Cortina SE Travel System

Cortina SE Cleaning Instructions:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Cortina SE Maintenance Instructions:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. If wheel squeaks, use a light oil (e.g., WD-40, 3-in-1, or sewing machine oil). It is important to get the oil in the axle and wheel assembly. Periodically check the stroller for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place. If stroller becomes wet open canopies and allow the stroller to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

KeyFit 30 Cleaning Instructions:

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. Hang to dry. DO NOT USE BLEACH.

KeyFit 30 Maintenance:

To clean Plastics, Harness, Buckle, LATCH Straps, and LATCH Hardware:

Sponge clean using warm water and mild soap. Towel dry.

Full-Feature Strollers

Cortina Magic

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. If wheel squeaks, use a light oil (e.g., WD-40, 3-in-1, or sewing machine oil). It is important to get the oil in the axle and wheel assembly. Periodically check the stroller for loose screws, worn parts, torn materials or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place. If stroller becomes wet open canopies and allow the stroller to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Urban

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Bravo

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Bravo LE

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Viaro

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lightweight Strollers

Liteway

The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

The cover can be removed (please refer to the product manual section "How to Remove the Fabric Cover"). Please refer to the care labels for instructions on how to clean the fabric parts.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone based lubricant. Regularly check the condition of the wheels and, keep them clean of dust and sand. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place.

Liteway Plus

Cleaning:

The cover can be removed (please refer to section "How to Remove the Fabric Cover" of the product manual). Please refer to the care labels for instructions on how to clean the fabric parts.

Periodically wipe plastic parts clean with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. Regularly check the condition of the wheels and keep them clean of dust and sand. Periodically check the stroller for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place. If stroller becomes wet open canopy and allow the stroller to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade.

Echo

The cleaning and maintenance of this product must be carried out on a regular basis by the user. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

The cover is not removable. Clean the fabric parts with a damp sponge and neutral detergent. Please refer to the product's care label. Routinely wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. Routinely check the condition of the wheels and all moving parts. Keep them free from dust, dirt or sand. To avoid friction, that may prevent the correct use of the stroller, ensure that all the movable plastic parts located along the metal frame are free from dust, dirt or sand. Keep the stroller in a dry place.

C6/Capri

The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Periodically wipe the plastic parts of the stroller clean with a soft, damp cloth. Do not use abrasive, ammonia-based, bleach-based, or spirit type cleaners. Always dry the metal parts to prevent rust from forming. Avoid exposure to saltwater or seawater as this may cause rust to form.

Maintenance:

Regularly inspect locking devices, brakes, harness assemblies, catches, seat adjustors, joints, and fixings to ensure that they are secure and in full working order. Brakes, wheels, and tires are subject to wear and should be replaced if necessary with parts supplied by the manufacturer. Lubricate only if necessary. Should the parts become stiff or difficult to operate, first ensure that dirt is not causing the problem. Then, lightly apply a silicone-based lubricant between the components. Do not overspray, as this may cause dirt to accumulate.

Fabric:

Please note that the seat fabric on this stroller is not removable or waterproof. Before cleaning, refer to the instructions on the care label. Avoid exposure to damp conditions. If the stroller does get damp, leave it fully opened in a warm environment. Dry off with a soft cloth. If you store the stroller when it is damp, mildew may form.

Frame Carrier

KeyFit Caddy

This product requires regular maintenance. The cleaning and maintenance of the caddy must only be carried out by an adult.

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the caddy.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the caddy has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. If wheel squeaks, use a light oil (e.g., WD-40, 3in-1, or sewing machine oil). It is important to get the oil in the axle and wheel assembly. Periodically check the caddy for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the caddy, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the caddy in a dry place. If caddy becomes wet open Caddy and allow to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Double Strollers

Cortina Together

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. Periodically check the stroller for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the stroller, ensure that all the movable plastic parts placed along the metal frame are clean of dust, dirt or sand. Keep the stroller in a dry place. If stroller becomes wet open canopies and allow the stroller to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Echo Twin

Cleaning:

The cover is not removable. Spot clean the fabric parts with a damp sponge and mild soap. Please refer to the product's care label. Routinely wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

BravoFor2

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Hand wash in cold water, no bleach, drip dry. Periodically wipe plastic or metal parts clean with a soft damp cloth; towel dry.

Maintenance:

Joggers

TRE

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

To remove the cover of the stroller please refer to the section "How to Fit/Remove the Cover" of the product manual. Please refer to the care label for instructions on cleaning the fabric parts of the stroller.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

When storing the tires in a hot area, release some air from the tires to prevent excessive expansion. If the stroller feels like it's pulling to one side, check to make sure that the tires have equal pressure. If you have a flat tire, you can use a standard bicycle tire repair kit to repair the tire. For replacement parts or additional information contact Chicco USA.

ACTIV3

This product requires regular maintenance. The cleaning and maintenance of the stroller must only be carried out by an adult.

Cleaning:

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

Maintenance:

Highchairs and Hook-Ons

Stack

This product requires regular maintenance. The cleaning and maintenance of the product must only be carried out by an adult.

Cleaning:

Refer to the Care Label for instructions on cleaning the fabric parts of the product. You can spot clean the seat pad with a damp cloth and mild detergent. Do not use bleach, spray, or wipes on the Pad or plastics parts on this product. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the product has come into contact with water.

Maintenance:

Periodically check the product for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the product, ensure that all the movable plastic parts placed along the metal frame are clean of dust and dirt. Keep the product in a dry place. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Polly Magic

This product requires regular maintenance. The cleaning and maintenance of the highchair must only be carried out by an adult.

Cleaning:

You can remove the seat pad for cleaning. To do so, unfasten the restraint harness and pull the seat pad upward. You can spot clean the seat pad with a damp cloth and mild detergent. Do not Machine Wash Seat Pad. Do not use bleach wipes or spray on the Pad or Plastics. Do not bleach. Please refer to the care label for instructions on cleaning the fabric parts of the highchair. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the highchair has come into contact with water. Important for your child's safety do not remove the crotch bar from the tray.

Maintenance:

Lubricate the moving parts only if necessary, with a light application of a silicone-based lubricant. Periodically check the highchair for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. To avoid friction that may prevent the correct operation of the highchair, ensure that all the movable plastic parts placed along the metal frame are clean of dust and dirt. Keep highchair in a dry place. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Polly Highchair

The cleaning and maintenance of this product must be carried out on a regular basis by the user. The cleaning and maintenance of the Highchair must only be carried out by an adult.

Cleaning:

Maintenance:

Lubricate only when necessary using a dry silicone-based lubricant. Clean all plastic parts periodically using a soft damp cloth and mild detergent. Do not use bleach. Check the wheels periodically for signs of wear or damage and keep them clean of dust or sand. Prolonged exposure to sunlight will cause the fabric to fade. Serving tray insert can be washed in the dishwasher. The main tray can be wiped clean using a soft damp cloth and mild detergent. Do not use bleach. Important for your child's safety do not remove the crotch bar from the tray.

Polly Progress Highchair

The cleaning and maintenance of this product must be carried out on a regular basis by the user. The cleaning and maintenance of the Highchair must only be carried out by an adult.

Cleaning:

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the product has come into contact with water.

Maintenance:

Progress Relax Highchair

The cleaning and maintenance of this product must be carried out on a regular basis by the user. The cleaning and maintenance of the Highchair must only be carried out by an adult.

Cleaning:

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the product has come into contact with water.

Maintenance:

QuickSeat

Please refer to the care labels for instructions on how to clean the fabric seat. It is recommended to periodically clean between the movable and fixed plastic parts of the seat with a toothbrush to remove any possible food residues. Always dry the metal parts to prevent the formation of rust. Plastic can be cleaned with mild detergent and warm water, no bleach or harsh cleaners/abrasives.

PocketSnack

All cleaning and maintenance operations must only be carried out by an adult. Periodically check the booster seat for wear, damage, or missing components. Should any parts be missing or damaged, the booster must not be used. Clean the plastic parts with a damp cloth only. Do NOT fully submerge Tray in water. The tray is NOT dishwasher safe.

Caddy Hook-On Chair

Hand wash the seat cover in cold water. Drip dry. For complete care and maintenance instructions, refer to the label on the product and to the product’s instruction manual.

Deluxe Travel Seat Hook-On Chair

Hand wash the seat cover in cold water. Drip dry. For complete care and maintenance instructions, refer to the label on the product and to the product’s instruction manual.

360 Hook-On Chair

The cleaning and maintenance of the Hook-on Chair must only be carried out by an adult.

Cleaning:

The fabric seat can be removed (please refer to the section "How to Remove the Fabric Seat"). Please refer to the care labels for instructions on how to clean the fabric seat. It is recommended to periodically clean between the movable and fixed plastic parts of the seat with a toothbrush to remove any possible food residues. Always dry the metal parts to prevent the formation of rust. Plastic can be cleaned with mild detergent and warm water, no bleach or harsh cleaners/abrasives.

Maintenance:

This product requires regular maintenance. Periodically check the Hook-on Chair for wear, damage, or missing components. Should any parts be missing or damaged, the Hook-on Chair must not, under any circumstances, be used.

Feeding & Soothing

3-in-1 Steam Sterilizer

Cleaning:

Make sure the Sterilizer is unplugged and the power cord is disconnected before cleaning. Clean Sterilizer regularly. After each use allow to cool down completely, pour out leftover water and dry the inside thoroughly. Use a soft damp cloth to clean the Sterilizer. Do NOT use bleach or any other harsh chemicals. Sterilizer is NOT dishwasher safe. Dry thoroughly before storing. Store in a dry place. When cleaning the Electric Base, never immerse it in water or any other liquid.

Maintenance:

The normal use of the Sterilizer can cause the formation of scale residue on the heating plate. Excessive scale residue may cause incorrect operation and prevent proper sanitation of the objects inserted in the appliance, and/or causing permanent damage to the appliance. To descale the Electric Base make sure it is unplugged and has cooled down completely. Fill reservoir with a solution of equal parts water and vinegar and let soak overnight. Do NOT run the unit through a sanitation cycle. After it has soaked overnight, empty out the water and vinegar solution. Dry thoroughly with a soft cloth.

Bottles & Nipples

Cleaning:

Before First Use: Sterilize in boiling water for 5 minutes. Allow to cool completely and dry thoroughly. When reassembling bottle, make sure the cap ring is screwed tightly on to the Feeding Bottle to avoid leaking. Pull up on the Feeding Nipple to make sure it is correctly fitted into the cap ring.

To ensure optimal hygiene, always wash and rinse thoroughly before and after each use. Disassemble completely before cleaning. Clean using mild soap and water. Do NOT use bleach or any other harsh chemicals. The Feeding Nipple is not dishwasher safe – All other parts can be washed in the dishwasher - top rack ONLY.

Duo Bottles can be sterilized using an electric sterilizer.

Microwave heating of bottle contents can cause uneven heating and is not recommended.

Maintenance:

Regularly sterilize in boiling water for 5 minutes. Allow to cool completely and dry thoroughly before storing. Store in a dry place.

Pacifiers

Cleaning:

Before First Use: Sterilize in boiling water for 5 minutes. Allow to cool completely and dry thoroughly. If needed, squeeze out any trapped water.

To ensure optimal hygiene, always wash and rinse thoroughly before and after use. Clean using mild soap and water. Do NOT use bleach or any other harsh chemicals. The Pacifier is not dishwasher safe. Dry thoroughly before storing – If needed, squeeze out any trapped water.

Maintenance:

Store in a dry place.

Bottle & Baby Food Warmer

Cleaning:

Before cleaning turn the control to the OFF “O” position, then remove plug from wall outlet. Clean Bottle Warmer regularly. After each use allow to cool down completely, pour out leftover water and dry the inside thoroughly. Use a soft damp cloth to clean the Bottle Warmer. Do NOT use bleach or any other harsh chemicals. Bottle Warmer is NOT dishwasher safe. Dry thoroughly before storing. Store in a dry place.

Maintenance:

The normal use of the Bottle Warmer can cause the formation of scale residue on the heating plate. Before de-scaling turn the control to the OFF “O” position, then remove plug from wall outlet. Make sure the Bottle Warmer has cooled down completely. Fill with a solution of equal parts water and vinegar and let soak overnight. After it has soaked overnight, empty out the water and vinegar solution. Fill the bottle warmer with ½ cup = 4oz/120ml of water and run through one warming cycle. After the cycle is complete turn the control to the OFF “O” position, then remove plug from wall outlet. Make sure the Bottle Warmer has cooled down completely. Pour out water and dry thoroughly.

Digital Bottle Warmer

Cleaning:

Before cleaning turn off the Bottle Warmer by pressing the Power Button for 3 seconds, then remove plug from wall outlet. Clean Bottle Warmer regularly. After each use allow to cool down completely, pour out leftover water and dry the inside thoroughly. Use a soft damp cloth to clean the Bottle Warmer. Do NOT use bleach or any other harsh chemicals. Bottle Warmer is NOT dishwasher safe. Dry thoroughly before storing. Store in a dry place.

Maintenance:

The normal use of the Bottle Warmer can cause the formation of scale residue on the heating plate. Before de-scaling turn off the Bottle Warmer by pressing the Power Button for 3 seconds, then remove plug from wall outlet. Make sure the Bottle Warmer has cooled down completely. Fill with a solution of equal parts water and vinegar and let soak overnight. After it has soaked overnight, empty out the water and vinegar solution. Fill the Bottle Warmer with ½ cup = 4oz/120ml of water and run through one warming cycle. After the cycle is complete turn off the Bottle Warmer by pressing the Power Button for 3 seconds, then remove plug from wall outlet. Make sure the Bottle Warmer has cooled down completely. Pour out water and dry thoroughly.

Microwave Sterilizer

Cleaning:

To ensure optimal hygiene, always wash and rinse thoroughly before and after use. Clean using mild soap and water. Do NOT use bleach or any other harsh chemicals. Sterilizer is dishwasher safe – Top rack only. Dry thoroughly before storing. Store in a dry place.

Maintenance:

The normal use of the Sterilizer can cause the formation of scale residue. A solution of equal parts water and vinegar may be used to soak the base of the Sterilizer overnight to remove any scale residue.

Cups

Cleaning:

Before First Use:

Non-insulated cups can be sterilized using steam sterilization or cold sterilization. Non-insulated cups can also be sterilized in boiling water for 5 minutes, before first use. Allow to cool completely and dry thoroughly. Do NOT boil or sterilize the insulated cups. All parts are dishwasher safe - top rack ONLY. Use of a dishwasher may accelerate wear.

Using the Silicone Valve:

Pull the Silicone Valve out of the cup lid to remove. When re-attaching the valve, always line up the larger ring with the largest part on the valve. Make sure the valve is completely pushed down into the rings on the cup lid. Note: ALWAYS clean the inside of the cup lid where the valve is attached.

Attaching the Silicone Spout:

Pull the Silicone Spout up through the cup ring. Make sure the air vents on the cup ring are centered in the cutouts on the Silicone Spout.

Attaching the Silicone Rim:

Insert Silicone Rim into the cup ring. Push the groove down until it seals completely around the rib. Before Each Use: Push down on center of the Silicone Rim to ensure a tight seal.

Using the Flip-Top Straw Lid:

Push over on the Sliding Cap to store the straw when not in use. The straw can be removed and separated when cleaning.

To ensure optimal hygiene, always wash and rinse thoroughly before and after each use using mild soap and warm water. Do NOT use bleach or any other harsh chemicals. Disassemble all parts completely, including the valve, before cleaning. ALWAYS clean the inside of the cup lid where the valve is attached. All cups and parts are dishwasher safe on delicate cycle - top rack ONLY. Use of a dishwasher may accelerate wear. Dry thoroughly before storing in a dry place. Do NOT boil or sterilize the insulated cups - all other cups can be sterilized. Allow to cool completely and dry thoroughly.

Maintenance:

Store in a dry place.

Playards and Bassinets

Lullaby

This product requires regular maintenance. The cleaning and maintenance of the Lullaby must be carried out by an adult.

Cleaning:

The mattress cover can be machine washed by removing the floor boards. Locate the zipper on the mattress cover and unzip. Remove all of the floor boards and set them aside. Do not immerse the wooden floor boards in water. Wipe clean with a damp cloth and mild detergent. (Do not use bleach). Hand wash the mattress cover in cold water or delicate cycle using a mild detergent (do not use bleach). Hang to dry.

Please refer to the care label for instructions on cleaning the fabric parts of the Lullaby.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the Lullaby has come into contact with water.

Maintenance:

Periodically check the lullaby for loose screws, worn parts, torn materials or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. Keep the Lullaby in a dry place. If Lullaby becomes wet open Lullaby and allow to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Lullaby Baby

This product requires regular maintenance. The cleaning and maintenance of the playard must only be carried out by an adult.

The mattress cover, napper cover, and changer insert can be washed, remove the boards from the mattress cover and napper cover as shown.

Locate the zipper on the mattress cover and unzip. On the back of the Napper undo the zipper. Remove the Napper Pad from the Napper Frame. Locate the opening at the back of the napper cover and remove the boards and set them aside. Do not immerse the wooden boards in water. Wipe clean with a damp cloth and mild detergent (do not use bleach).

Cleaning:

Please refer to the car label for instructions on cleaning the fabric parts of the playard. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the playard has come into contact with water.

Maintenance:

Periodically check the playard for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. Keep the playard in a dry place. If playard becomes wet open playard and allow to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

Lullaby Dream

This product requires regular maintenance. The cleaning and maintenance of the playard must only be carried out by an adult.

The mattress cover, napper cover and changer insert can be washed, remove the boards from the mattress cover and napper cover. Locate the zipper on the mattress cover and unzip. Remove all of the floor boards and set them aside. On the back of the Napper undo the zipper and two snap buttons. Remove the Napper Pad from the Napper Frame. Locate the opening at the back of the Napper cover and remove the boards and set them aside. Undo the zippers and remove the Changer Insert.

Do not immerse the wooden boards in water. Wipe clean with a damp cloth and mild detergent (do not use bleach).

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the playard.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the playard has come into contact with water.

Maintenance:

Lullaby Glow

This product requires regular maintenance. The cleaning and maintenance of the playard must only be carried out by an adult.

Do not immerse the wooden boards in water. Wipe clean with a damp cloth and mild detergent (do not use bleach).

Cleaning:

Please refer to the care label for instructions on cleaning the fabric parts of the playard.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the playard has come into contact with water.

Maintenance:

LullaGo/LullaGo Deluxe

This product requires regular maintenance. The cleaning and maintenance of the bassinet must only be carried out by an adult.

Cleaning:

The bassinet and mattress have fabric covers that are completely removable and washable. Check the product regularly for signs of wear and damage and to ensure that it is assembled correctly. Should any part be damaged, do not use it and keep it out of reach of children. Do not clean the product with solvents, abrasive or harsh products.

Please refer to the care label for instructions on cleaning the fabric parts of the bassinet.

Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust. Do not immerse the floor boards in water. Wipe clean with a damp cloth and mild detergent (do not use bleach).

Activity

Carriers

UltraSoft Carrier

Infant carrier care:

Spot clean with damp cloth and mild, soapy water. Or hand wash only in warm soapy water. Air dry. After each washing check that the fabric and seams are not worn or damaged.

Bib care:

Machine was warm. Tumble dry low. Do not use bleach.

Carrier Maintenance:

Check the seams and baby carrier regularly to ensure that they are not worn or damaged, and that no part is missing If any part is worn or missing, do not use this product.

UltraSoft Magic Carrier

Infant Carrier Care:

Spot clean with damp cloth and mild, soapy water. Or hand wash only in warm soapy water. Air dry. After each washing check that the fabric and seams are not worn or damaged.

Bib Care:

Machine was warm Tumble dry low. Do not use bleach.

Carrier Maintenance:

Check the seams and baby carrier regularly to ensure that they are not worn or damaged, and that no part is missing. If any part is worn or missing, do not use this product.

Coda Carrier

Infant Carrier Care: Spot clean with damp cloth and mild, soapy water. Or hand wash only in cold water. Air dry. After each washing check that the fabric and seams are not worn or damaged. Do not use bleach.

Carrier Maintenance:

Check the seams and baby carrier regularly to ensure that they are not worn or damaged, and that no part is missing. If any part is worn or missing, do not use this product.

Close to You Carrier

Infant Carrier Care: Spot clean with damp cloth and mild, soapy water. Or hand wash only in warm soapy water. Air dry. After each washing check that the fabric and seams are not worn or damaged.

Bib Care:

Spot clean with damp cloth and mild, soapy water. Or hand wash only in warm soapy water. Air dry. Do not use bleach.

Carrier Maintenance:

Check the seams and baby carrier regularly to ensure that they are not worn or damaged, and that no part is missing. If any part is worn or missing, do not use this product.

SmartSupport Backpack

This product requires regular maintenance. Please refer to the care label for instructions on cleaning the product. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of corrosion. Periodically check the condition of the shoulder straps' and set's seams. If carrier gets wet, let the carrier dry in the air, before storing in the bag. Prolonged exposure to direct sunlight may cause the fabric to fade.

Walkers

1-2-3 Walker

The cleaning and maintenance of the Walker must only be carried out by an adult.

Cleaning:

The fabric seat can be removed (please refer to step 3 of the product manual and reverse the step). Please refer to the care labels for instructions on how to clean the fabric seat.

It is recommended to periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the Walker has come into contact with water.

Clean the electronic play tray with a soft dry cloth to avoid damaging the electronic circuit. Protect the walker and electronic play tray from heat, dust, sand, and water.

Plastic can be cleaned with mild detergent and warm water, no bleach or harsh cleaners/abrasives.

Maintenance:

This product requires regular maintenance. Periodically check the Walker for wear, damage, or missing components. Should any parts be missing or damaged, the Walker must not, under any circumstances, be used.

Little Piano Walker

Check regularly the walker frame for signs of damage or wear. If any parts are damaged, torn or missing, do not use the walker frame before having them replaced or repaired. Clean the plastic parts, including the stoppers, with a damp cloth. Dry the metal parts to prevent the formation of rust. Prolonged exposure to direct sunlight may cause the fabric to fade.

Walky Talky

Check regularly the walker frame for signs of damage or wear. If any parts are damaged, torn or missing, do not use the walker frame before having them replaced or repaired. Clean the plastic parts with a damp cloth. The fabric seat can be removed and cleaned. Please refer to your product manual for cleaning instructions. Prolonged exposure to direct sunlight may cause the fabric to fade.

D@nce Walker

The cleaning and maintenance of the Walker must only be carried out by an adult.

Cleaning:

The fabric seat can be removed (please refer to section 6 of the product manual and reverse the step). Please refer to the care labels for instructions on how to clean the fabric seat.

It is recommended to periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the Walker has come into contact with water.

Clean the electronic play tray with a soft dry cloth to avoid damaging the electronic circuit. Protect the walker and electronic play tray from heat, dust, sand, and water.

Plastic can be cleaned with mild detergent and warm water, no bleach or harsh cleaners/abrasives.