Easy Leveling
Spring-loaded leveling foot helps achieve proper base angle during installation
Spring-loaded leveling foot helps achieve proper base angle during installation
Two easy-to-read bubble levels accurately verify base angle during installation
Force-multiplying LATCH tightener helps achieve a tight and secure fit with less effort
Zip-off canopy with zip-on visor provides shade and zip-around boot keeps baby cozy
5-point harness can be tightened with only one hand for a snug fit with less effort
Click-in attachment and one-hand removal from included base (extras sold separately)
Compatible with Chicco strollers for on-the-go, travel system convenience
The #1-rated Infant Car Seat in America!
The KeyFit® 30 is engineered with innovative features that make it the easiest infant car seat to install simply, accurately, and securely, every time. KeyFit® 30 Zip also features stylish zipper accents and a quick-remove seat pad for machine washing.
Easiest to Install Correctly
KeyFit® 30’s stay-in-car base has a ReclineSure® leveling foot and two RideRight® bubble level-indicators to help achieve and verify proper angle in the vehicle seat. The base is also equipped with premium LATCH connectors and a SuperCinch® tightener for a secure fit with a fraction of the effort! For alternate installation with the vehicle seat belt, clear belt routing and integrated lock-offs make it easy to position, tighten and lock the belt into place.
Tailored for Comfort
To accommodate newborns, the car seat carrier includes removable head and body support with reversible knit/mesh fabrics for all-season comfort. A five-point harness with one-pull tightening helps keep baby secure, and the carrier shell is lined with EPS energy-absorbing foam for improved impact protection. For comfortable shade from the sun, the KeyFit®30 Zip features a large zip-off canopy with a zip-on visor. A stylish zip-around boot creates a cozy environment.
Built for Everyday Convenience
The KeyFit® 30 is designed for travel system use with compatible strollers from Chicco. The carrier secures easily to the base and strollers with a reassuring audible click. A two-position carry-handle and one-hand release make it just as easy to remove.
Usage
The KeyFit® 30 Zip is designed for infants between 4-30 pounds and up to 30 inches tall.
Care and Maintenance
Machine wash fabrics separately in cold water on delicate cycle. Do not use bleach; drip dry. Plastics and hardware may be sponge cleaned using warm water and mild soap; towel dry. To clean harness, sponge clean using warm water and mild soap; air dry. Do not machine wash harness.
The stay-in-car component of an infant car seat in which the carrier clicks securely into for each ride. Additional bases may be purchased separately so that each parent/caregiver can transport.
Expanded Polystyrene (EPS) is a high quality, dense foam that is found on many Chicco car seats due to its proven ability to effectively absorb energy.
A safety restraint that uses 5 points of contact to secure a child in a car seat, stroller or highchair. Points of contact include the crotch strap and dual hip/shoulder straps, compared to a 3-point harness which only secures the child via the crotch and hip straps.
A rear-facing car seat that consists of the infant carrier and a stay-in-car base, which allows parents and caregivers to easily transport baby between cars and a compatible stroller without unbuckling them from the carrier.
Lower Anchors and Tethers for Children, or “LATCH,” is a car seat installation method in which the vehicle seat belt is not used. Instead, the car seat LATCH connectors attach to the lower anchors found in the seat bight of your vehicle. Refer to your vehicle’s owner manual and your car seat manual for more information.
An infant car seat feature that uses a spring-loaded leveling foot to easily achieve proper angle of the stay-in-car base during installation.
A system of bubble level indicators found on either side of Chicco car seats that help verify during installation that the car seat is at the proper angle.
A car seat installation feature that uses force-multiplying technology to tighten the connection between the car seat and the vehicle LATCH hooks to reduce overall car seat movement.
A matching stroller, infant car seat and stay-in-car base delivered together in a single carton. The car seat clicks securely into the base and the stroller to simplify travel with newborns and babies.
The KeyFit 30 Zip in Hydra makes a modern statement, showcasing a tranquil hue of aqua blue in a soft, striped knit. Grounded in rich, charcoal grey and complete with aqua zipper accents, Hydra embodies contemporary class.
Assembled Dimensions: 27.5" x 17" x 24"
Product Weight Without Base: 10 lbs
Base Only Dimensions: 20" x 15" x 8"
Base Only Weight: 7 lbs
Ship Weight: 22.1 lbs
Carton Dimensions: 17.5" x 15.25" x 28.25"
Harness Mode - Rear-Facing | 4-30 lbs |
Harness Mode - Forward-Facing | - |
Booster Mode - High Back | - |
Booster Mode - Backless | - |
LATCH | SuperCinch® |
Seat Belt Installation | LockSure™ |
Recline Positions | 5 |
Product Weight | Carrier 9.5 lbs / Base 7 lbs |
Product Total Width | 16.5" |
Total Harness Slot Height | 9" |
Total Belt-Positioning Clip Height | - |
Product Interior Width (Shoulder) | 10" |
Product Interior Width (Hips) | 10.5" |
Product Interior Seat Depth | 14" |
Product Max Seated Height | 19.5" |
Assembled Product Max Seat Back Height | 16" |
Product Depth (Footprint) | 22" |
Height Adjust Positions | 3 |
Crotch Positions | 1 |
RF Child Max Height Capacity | 30" |
FF Child Max Height Capacity | - |
Booster Child Height Capacity | - |